Features and Benefits:
CPT7748TL-2
- Torque limited in forward to limit the risk of over tightening and maximum torque in reverse
- Lightweight (4.65 lbs) and compact (8.86 in. long) for improved comfort
- Composite housing, twin hammer impact mechanism, hard anodized end plates, and hard chromium aluminum cylinder for high durability
- Low vibration tool due to lower torque in forward.
- Curved rubber handle to help prevent slipping
The CP7748TL series limits the risk of over tightening during the tightening phase while also being very powerful when nuts or bolts have to be removed. In addition, the new forward/reverse system and power control (ring system) increase operator comfort while also improving functionality.
Specifications:
- Power weight ratio: 520 Nm/kg
- Free Speed: 8200 rpm
- Max dynamic air working pressure: 91 psi
- Air inlet thread size (in): 1/4
- Sound Pressure: 86 dB(A)
- Uncertainty vibration-K: 4.9 ft/s²
- Sound Power: 97 dB(A)
- Starting system: Trigger
- Impact mecanism: Twin hammer
- Output drive type: Sq
- Clutch lubrication type: Grease
- Side to Center: 1.5 in
- Output drive size (in): 1/2
- Handle type: Pistol
- Output retainer type: Friction ring
- Clutch housing: Aluminum
- Body: Composite
- Min working torque fwd: 66.4 ft/lb
- Torque limited: Yes
- Max working torque fwd: 103 ft/lb
- Max torque reverse: 922 ft/lb
MADE IN TAIWAN
WARNING: This product can expose you to Silica, crystalline (airborne particles of respirable size) a chemical known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov