Features and Benefits:
LEWK2698-1
- Heavy Duty Wire Drive - Fully adjustable drive system reduces the chance of wire tangling and crushing.
- Brass-to-brass gun connection enhances conductivity.
- Durable cast aluminum gear box delivers added drive torque and quiet operation.
- Capable Performance - Forgiving arc makes dialing in Your application easy.
- Smooth arc starts with minimal spatter.
- Wide 30-180 amp welding output range.
- MIG weld 24 gauge up to 3/16 in. (4.8 mm) sheet metal in a single pass. Weld up to 1/2 in. (12.7 mm) steel using self-shielded Lincoln Electric Innershield (FCAW-S) wires.
Get it done with the Easy MIG for farm, light fabrication, auto or home projects! If you have access to 208/230 volt input power, you can weld on thicker material. Simple two knob control makes it easy to tackle thin steel, stainless or aluminum sheet metal with MIG or thicker steel with flux-cored welding. The Easy MIG 180 wire feeder welder is setup for welding thin steel, stainless or aluminum sheet metal with MIG or thicker steel with flux-cored welding.
Included:
- Gun Magnum 100L gun and 10 ft. (3.0 m) cable assembly with brass gun connection and 4-pin MS-Type connection for trigger control (K530-6)
- .025 in (0.6 mm) and .035 in (0.9 mm) contact tips Gasless nozzle for Innershield welding (KH726)
- Gas nozzle for MIG welding (KH725)
- Spindle adapter for 8 in. (203 mm) diameter spools (KH720)
- Shielding Gas Apparatus Harris 3000290 Gas Regulator (S25805)
- 52 in. (1.3 m) hose (S19303) for use with Ar/CO2 or CO2 gases. For use with CO2 shielding gas
MADE IN MEXICO
WARNING: This product can expose you to Silica, crystalline (airborne particles of respirable size) a chemical known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov
