Features and Benefits:
- For any type and size of cylinder The FLEX-HONE process (Superfinishing) produces a controlled surface condition unobtainable by any other method.
- It involves finish, geometry and metallurgical structure.
- A high percentage plateau free of cut, torn and folded metal (with radiused ports).
A resilient, flexible, honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering, self-centering to the bore, and self-compensating for wear. Specifically, it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented, amorphous or smeared metal from previous operations. It is accomplished at a low pressure where the "stones" float. See and read the various booklets of actual tests covering almost every situation that will ensure a superior performance in situations depending on surface finish. The particular type of Flex-Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys for oil retention as opposed to the often unidirectional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the Flex-Hone.
MADE IN USA
WARNING: This product can expose you to Silica, crystalline (airborne particles of respirable size) a chemical known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov